Oct 23, 2007 · The programmer uses a firmware-only USB driver, no special USB controller is needed. Features Works under multiple platforms. Linux, Mac OS X and Windows are tested. No special …

# TARGET=atmega88 HFUSE=0xdd LFUSE=0xff Windows: Start Windows and connect USBasp to the system. When Windows asks for a driver, choose "bin/win-driver". On Win2k and WinXP systems, …

Project News SANA USBasp with ZIF-Socket Hossein added ZIF socket and several automatic features to USBasp.

Six channel CAN bus motor controller Driver board with CAN bus interface for six DC motors.

May 28, 2011 · USB Interfaces - Embedded Software Development - fischl.de

‚ KOHTAKT‚ KOHTAKT‚ KOHTAKT‚ KOHTAKT‚ KOHTAKT‚ KOHTAKT‚ KOHTAKT‚ KOHTAKT‚ KOHTAKT‚ KOHTAKT PROGRAM AVR USBASP 1MOSI 2+5V …

USBtinLib is open source (LGPL) and runs on several platforms (Windows, Linux, MacOS). The example code (left box) prints out incoming CAN messages and send out one message.

It uses a firmware-only USB driver to transfer binary data from the PC to the flash of the controller. Once the AVR is flashed with the bootloader, no other ISP programmer is needed; then the microcontroller …

II ´ ;P-CAD 2002 Schematic V17.00.50 P-CAD 2002 Schematic Binary (Rev 5)  17.00.50 Binary OLD_LICENSE_INFORMATION 17.00.50{3FC20FDF-9118-457A-9B6D-3966E7C5CB1B}ý d- …

Now the "ispnub.hex" can be flashed with your favorite programmer (e.g. USBasp) into the ISPnub module. Set the jumper on the ISPnub while programming (and don't forget to remove the jumper …